Author Topic: Cleaning alloy hull (Read 962 times)

agh · « **on:** June 30, 2021, 21:56:20 PM »

Hi. Anyone know a good method of cleaning an alloy hull that has rub and general light surface marks. Someone said use a mag wheel acid cleaner but worried it will end up dull and attract more marks easily. Any suggestions or products out there?

Ross Goldsack - JBNZ Immediate Past President · « **Reply #1 on:** July 01, 2021, 09:20:22 AM »

I have used mag wheel cleaner on boats, it makes a huge difference but leaves the alloy very white. Definitely trial it somewhere inconspicuous first.

Matthewf/Norbert/TuiDog · « **Reply #2 on:** July 01, 2021, 12:37:37 PM »

blue truck wash CT18 or similar

alloy cleaners will stain or go white as ross said.

previously sanded or flapper dick surfaces use a kitchen scour pad and truck wash, comes up new. all other hard virgin surfaces just truck wash

LBD · « **Reply #3 on:** July 07, 2021, 22:04:15 PM »

Takes a lot of elbow grease to do it right....

Warwick Marflitt · « **Reply #4 on:** July 14, 2021, 16:13:07 PM »

Quote from: LBD on July 07, 2021, 22:04:15 PM

Takes a lot of elbow grease to do it right....

Oi! You forgot to polish the wheels...

JBNZ Chat - Official web board of Jet Boating New Zealand

Wordpress menu

Author Topic: Cleaning alloy hull (Read 962 times)

agh

Cleaning alloy hull

Ross Goldsack - JBNZ Immediate Past President

Re: Cleaning alloy hull

Matthewf/Norbert/TuiDog

Re: Cleaning alloy hull

LBD

Re: Cleaning alloy hull

Warwick Marflitt

Re: Cleaning alloy hull