Author Topic: Plastic 2.0 (Read 2519 times)

wad26 · « **Reply #15 on:** October 28, 2021, 16:05:13 PM »

Bit of an update

Ive been tidying up the motor, mainly a Dulux overhaul at this stage. Problem is once i put it in the boat i realised the exhaust protruded 100 foward into my seating area. This is 100 mm i could not afford to loose so i embarked on a modification of the old, double layered, pusey, corroded cast alloy manifold. I think it turned out ok considering,